Please confirm your age to continue. I hereby confirm that I am at least 18 years old.
The SQuape X[dream]

The SQuape X[dream] is a rebuildable tank atomizer which was developed and produced in its entirety in Switzerland. It is made by StattQualm GmbH to be used for the vaporisation of e-liquid. The SQuape X[dream] can be closed off completely by a slight rotation of the tank and is therefore absolutely leak-free. Because of the closed system the tank can be taken off the atomizer and transported empty or full. Short circuits are virtually impossible, through clever design of current conduction, as well as due to the nonconductive surface of the whole atomizer-chamber (consisting of ematalised

The SQuape X[dream] is a rebuildable tank atomizer which was developed and produced in its entirety in Switzerland. It is made by StattQualm GmbH to be used for the vaporisation of e-liquid. The SQuape X[dream] can be closed off completely by a slight rotation of the tank and is therefore absolutely leak-free. Because of the closed system the tank can be taken off the atomizer and transported empty or full. Short circuits are virtually impossible, through clever design of current conduction, as well as due to the nonconductive surface of the whole atomizer-chamber (consisting of ematalised

The SQuape X[dream] is a rebuildable tank atomizer which was developed and produced in its entirety in Switzerland. It is made by StattQualm GmbH to be used for the vaporisation of e-liquid. The SQuape X[dream] can be closed off completely by a slight rotation of the tank and is therefore absolutely leak-free. Because of the closed system the tank can be taken off the atomizer and transported empty or full. Short circuits are virtually impossible, through clever design of current conduction, as well as due to the nonconductive surface of the whole atomizer-chamber (consisting of ematalised aluminum).

The SQuape X[dream] is a rebuildable tank atomizer which was developed and produced in its entirety in Switzerland. It is made by StattQualm GmbH to be used for the vaporisation of e-liquid. The SQuape X[dream] can be closed off completely by a slight rotation of the tank and is therefore absolutely leak-free. Because of the closed system the tank can be taken off the atomizer and transported empty or full. Short circuits are virtually impossible, through clever design of current conduction, as well as due to the nonconductive surface of the whole atomizer-chamber (consisting of ematalised aluminum).

54.4 mm
Height
22 mm
Diameter
DualCoil or SingleCoil
Coiling
DL and MTL
Airflow
Features
  • Top Filling
  • Stepless Airflow Control (replaceable)
  • Single- or dual coil usage
  • Adjustable 510 connector (gold plated)
  • Replaceable borosilicate glass
  • Deck is accessible even with full tank
  • Nonconductive components inside the evaporation-chamber (deck and closing ring) – no danger of short circuits
  • No limits to thicker wires through pins with wire holes (2.2mm) and wire fixation through grub screws
  • Gold plated contacts
  • Suitable for Temp. Control and V/W mode
  • The tank can be completely closed and removed (even when full)
  • Easy switching of the three positions „vape“, „remove“ and „closed“ with the 3-mode-lock
  • 100% Made in Switzerland

  • Diameter: 22 mm
  • Height (without SQuip Tip and 510 connector): 54,4mm
  • Weight (without SQuip Tip): ~ 80g
  • Threads: 510
  • Tank volume: ~ 4.0 ml

  • Stainless steel components: Steelnumber 1.4404 / 316L
  • Glass: Borosilicate glass
  • Deck and closing ring: Aluminium, emtalised
  • Centerpin and poles: Ecobrass, gold-plated
  • O-rings: nbr 70 shore

FAQ
  • My SQuape X is leaking or has got some drops between the tank and base.
  • Cotton must be placed in front of the liquid holes and the channels. Use the supplied hex wrench to place the cotton into the right position. For liquids with lower VG percentage use a little more cotton and push it a bit more to the liquid holes and channels. Do not press, but to make sure it sits well. It is extremely important that no cotton is on the deck ledge. Use a good amount of cotton to fill the deck. For example, it helps to place cotton in the middle of the deck to build a bridge between the two coils. We recommend to change the cotton periodically. Certain cotton varieties can collapse and then no longer store the liquid sufficiently.

  • I get dry hits.
  • The cotton was probably pressed too firmly to the liquid holes and the channels within the deck. Either loosen the cotton slightly or lay new cotton.

  • The wire is cut when assembling.
  • Soft wires, like NI200 or NiFe and thin wires <0.3mm could be cut by excessive tightening. Place the wire in the hole (centrally) and tighten gently with the hex wrench in the grub screw. Insert the hex wrench with the long side so you apply less force.

  • No contact to the mod, „no atomizer »
  • Unscrew the centerpin a little. If this does not help, contact support@squape.ch.

  • How to clean the SQuape X?
  • There is a need from time to time to unscrew the centerpin and wipe it with a cloth. Condensed water can work its way down to the centerpin despite the sealing protection. We recommend to clean the SQuape X with running water or in an ultrasonic bath. Never clean in a dishwasher.

  • The TopCap can not be closed properly.
  • Remove the tank from the base, use a 4mm hex wrench, insert from below into the chimney and tighten it. Then the TopCap will close all the way.

  • The tank can not be put on the base.
  • Remove the closing ring (see picture in the manual) with a tweezer or paper clip and set it on your deck (see added flyer).

  • What size of coil do you recommend?
  • We recommend an inner diameter of 2.5mm for the coils placed on the side. If you like to place a coil in the middle you can build 3 – 4mm coils.

  • Loose or hard to turn AFC ring
  • Replace the o-ring with an o-ring from the replacement set. O-rings do have tolerances.

  • My glass is broken.
  • You’ve got a spare glass included to your set.

  • How to get a SQuape X?
  • The shop list can be found on our partner page or directly on shop.squape.ch/en

  • Where do I get more infos and tipps?
  • Check our Facebook group: https://www.facebook.com/groups/squape.stattqualm.official